Nitro RC cars are special for the kind of fuel they require to run. If not handled properly, the fuel can spill into the car’s system and ruin it. Thus, it is needed to not only be careful while putting the fuel in but also to clean the car regularly. If you play with any car frequently, then it is only natural that it will get dirty easily and will require cleaning more often than usual. If you are an active player of nitro RC cars, then you might want to have a look at this article to lengthen your car’s lifespan.
If you are clueless about the cleaning process of your nitro RC car, then do not be stressed anymore. Because you have come to the right place where you will get to everything about the cleaning process of the said RC model. Here, everything from the supplies needed to the cleaning process is described clearly for you! It is the perfect guideline that you have been looking for. So without further ado, let us dive in!
Steps to Follow:
1. Remove the Leftover Fuel:
Remove any fuel from the engine before cleaning it. Make sure the engine is completely empty otherwise, the cleansing will be half-done and the residual fuel might damage the system.
2. Remove the Spare Parts:
Make sure to remove the accessories or other spare parts before cleaning the car. Using a liquid cleaner (if the model is waterproof) or paper towel, wipe and clean the parts and make them free from dirt.
3. Clean the Tires:
Make sure to check every time whether the tires are intact or not. Using the brush and liquid soap, clean the tires properly to give your car a new look.
4. Clean the Engine Case:
After wearing safety glasses and gloves, and putting the alcohol in a spray bottle, clean the engine case. Use a small brush to clean every corner and always be cautious with the cleaning material. Make sure that the cleaning material is free of toxic chemicals and is not harsh on the car’s material.
5. Clean the other Parts:
Clean the other parts like the air filter element using liquid soap and a clean, soft cloth. Be careful to not pour alcohol into the electric parts directly. Also, make sure that the cleaning substances do not meet any sensitive parts.
6. Dry and Assemble:
Finally, using the air compressor or paper towel, dry the car and its parts. Make sure that no liquid is left near any sensitive part. After you are done, assemble the car and you are ready to go!
Points to Remember:
- Work under adult supervision if you are under aged.
- Make sure your model is waterproof before choosing liquid-based cleaning.
- Make sure to wear gloves while working with sensitive cleaners.
- Keep alcohol and such chemical substances out of children’s reach.
You might be interested in: