Sometimes making your own stuff gives you more pleasure than buying it. It is because when you buy something you are always put into a state to make a few compromises, but when you are making one you can make it in such a way that can give you complete satisfaction with no bargain. And also you can modify it the way you want.
Now we are in a technologically advanced era, and with the help of this, you can make your work much better and easier. Today, we are going to give you information on how to make a remote control car at home. We hope at the end of this article you will be able to make your remote control car.
Things to Get Ready
Before you start your work, you are requested to prepare the following materials. Arranging all the necessary materials beforehand will make your work much easier and faster ensuring all the processes are done without any mistakes. Therefore, here is what you have to put together:
1. Four-sided Container (Plastic Container is recommended)
2. Drilling Machine
3. Rubber Wheels
4. Motors
5. Plastic Epoxy
6. Batteries
7. Power Wires
8. Power Input
9. Two-Channel Radio Receiver
10. Remote Control
How To Pick The Suitable Materials?
Buying proper materials to make your remote-controlled car is really important. A suitable product can improve the overall performance of your remote control car. Therefore, to secure that you are highly suggested to pay attention to the factors mentioned below:
1. Motors:
To secure the variable speed of your remote-controlled car, you need to pick the motor that can moderate the voltage given to the motors. The motor’s output should be satisfactory compared to the voltage it’s getting. Also, check out how much power it can handle.
2. Size of The Wheels:
The larger the size of the wheels of your remote control car, there will be more resistance. As a result, it will require more power to speed up the model. Therefore, you are requested not to pick too big wheels. Again, it may depend on the size of your remote control car.
3. Battery:
Battery plays one of the most important roles when it comes to any electronic device. Depending on your battery you can determine how long you can play with your remote control car. Therefore, you are urged to pick the battery which can give maximum power to your model.
4. Speed Controlling System:
Too much of anything is not always good. If you want your remote-controlled car to last long, you have to ensure the best parts of your system. Here you are asked to check out the voltage your model can handle so that you can control the speed of your system properly. It will prevent any kind of damage from happening to your model.
Steps to Make a Remote Control Car
Now we are going to show you the steps to make a remote-controlled car at home effortlessly. To get the best result, follow the following steps as accurately as possible. So, with no further due let’s check out the process of making a remote control car.
Step: 1 Take a Container & Make Two Holes
At first, you are asked to take a rectangular container (preferably a plastic container). Make two holes opposite (across) to each other of your container with the help of a drilling machine. While making the holes, make sure it’s not much bigger than the motor you are going to use.
Step: 2 Set up The Wheels
After you are done with step 1, now you are requested to mount the wheels and plot the motor’s shafts through the holes you have just made from inside.
Note: All the parts should be added inside the container.
Step: 3 Attach The Motors
Next, you have to set the motors in place with the help of epoxy to secure their place and connections.
Note: Make sure that the epoxy is strong enough to hold the motors properly.
Step: 4 Wiring The Batteries
When you are done with all the steps given above, connect all the batteries with power wires; from the battery pack to power inputs.
Note: Make sure that the power input is two-channel remote receivers.
Step: 5 Wiring The Motors
Just like the batteries, wire the motors in the same manner to the output of the radio receiver.
Step: 6 Pack Things Up
After you are done with setting all the parts inside the containers (including batteries and radio receiver), you are asked to pack all these wires in such a way that you can close the container leaving any part outside of it.
Note: You can further use epoxy to stick all these inside.
Step: 7 Try Out
Now, you are done with all the setup. It is time for you to check out whether it works properly or not. Check this out by moving your car forward and backward & left and right.
Conclusion
Making your remote-controlled car will give you more affection than any other item. You will tend to take care of it more. One of the biggest advantages of making your remote-controlled car is you know your model better than anyone else. And if you ever face any problem you will know how to fix it. Not only can you, but you can also upgrade your model later all by yourselves. It will give you deeper knowledge about electronic products. It won’t be only about fun but also about enhancing your knowledge.
So, here we tried to provide you with well-researched information on how to make a remote control car at home. And we hope you have found this article helpful. We truly wish you were able to make your desired remote control car at home.
