Electric RC cars are super fun to play with. At the same time, these are the ones to easily be damaged by dirt getting inside the cars’ system. To keep the fun intact and lengthen the car’s durability, you must keep your electric RC car dirt free. But do you know how to clean your electric RC cars like a pro? Do you know how to clean these bad boys without damaging their systems? If the answers are “no”, then you have come to the right place!
Electric RC cars are quite sensitive and their system might get damaged easily with a small mistake. Therefore, it is important that the cleaning process is filled with caution and proper guidelines. To help you out in that process, we have brought to you a super informative article that lists every step needed to clean your electric RC cars. Thus, without further ado, let us jump get started:
- Clean dry cloth/ paper towel
- An all-purpose cleaner (optional)
Steps to Follow:
1. Remove Battery and Removable Parts:
Make sure to remove the extra parts and the battery of the car. As it is electronic in nature, the parts and the car itself need to be cleaned with caution. Wipe the parts with a clean dry cloth or paper towel.
2. Clean the Dirt:
After you are done removing the battery and spare parts, now it is time to clean the car properly. Using the air compressor and brush, remove the loose dirt and debris.
Make sure that the model is free from unwanted liquid substances that have the potential to damage your electric RC car’s internal system. You should use a brush to clean the fine details and corners of the car.
3. Cleaning Process for the Waterproof Models:
Electronic RC models are sensitive to water or any liquid substances. Unless your car is waterproof, keep the cleaning process free from water or liquids. If it is waterproof, then you can use a suitable liquid cleaner.
After spraying the cleaner, wipe the surface of the car with a clean cloth or paper towel. Using the brush and liquid soap, clean the tires properly to give your car a new look.
However, make sure that the cleaner does not get inside the car’s system. Besides, make sure the cleaner is free from hazardous substances and is suitable for your car’s material.
4. Dry and Assemble:
Finally, dry the car. It is important to make sure that the car is not wet before the parts are assembled to their original positions because the existence of any unwanted liquid may cause damage to the car’s system.
You can use a dry and clean cloth for this step. Besides, an air compressor can also come in handy in this process.
Points to Remember:
- Make sure your model is waterproof before choosing liquid-based cleaning.
- Make sure to wear gloves while working with sensitive cleaners.
- Work under adult supervision if you are under aged.
- Make that water and other liquids do not get inside the car’s system.
You might be interested in:
How to clean your RC car?
The Best Remote Control Pulling Truck
What Is The Best Electric Remote Control Truck?